How to restore the parquet without dressing

Now the soil is gaining popularity as a soil type. The parquet floor occupies a leading position thanks to its functionality, reliability and longevity. When, a few decades ago, such a dwelling was regarded as a luxury and reminiscent of the wealth of its owners, it is now everywhere in large country houses and small ordinary dwellings. As a result of the operation, he loses his call. Scratches, cracks can occur inside, it can crack, it can swell when wet cleaning, a separate band can be solved. Replace all expensive floor coverings completely. It is made of wood, which allows it to undergo several processes. In the article we will examine the possibility of a partial restoration of the parquet at home, depending on the defect that has occurred.

Types of parquet repairs.
1. A set of materials for the restoration of parquet.
2. Restoration of the parquet without scratching.
3. Scratches and cracks.
4. Gaps and chips in the ground.
5. Slot.
6. Soil crisis, local restoration of the parquet.
7.Swelling.
8.Restoration of slats.
9.Glued clay and chewing gum.
10.Reasonable care.

1. A set of materials for the restoration of parquet.

Material prepared to replace a damaged parquet

There are two types of partial repairs on this floor:

• Surface;
• Repair individual cubes.
• The first type includes: the removal of cracks, potholes and splinters, the restoration or color change of the plate.

Do not hold the restoration of the floor firmly for a long time. If your parquet is deteriorated, it does not shine due to the amount of scratches on the surface, if it creates an unpleasant crack under your feet, if so. At this time, the surface is swollen or detached when several rods fall from their seats are. The sooner the repair process starts, the less it will be quick and profitable. A set of materials for the restoration of parquet. For the planned elimination of errors you need special equipment and tools that you can purchase in a hardware store.

Also, be careful not to scratch the fresh polish with soft soles. Required materials: new tools to replace damaged floors;

• Glue and putty for wood;
• Oil,Spot,
• Painting and varnishing

2. Restoration of the parquet without scratching.

Prepare to isolate the problematic part

They are now ready to repair the wooden floor. Restoration of the parquet without scratching. It belongs to the category of surface repair and is realized in several steps. We remove the base and the powder, they will disturb. With a grinding machine we remove the previous paint layer. Use the manual cycle in hard-to-reach areas. Use a special hairdryer in the absence of a car. Warm the paint surface and clean it with a spatula.

After preparation, clean the room dust and dust with a vacuum cleaner.
Check the surface and, if necessary, the putty in separate areas. Then go through the grinder a second time, but with a coarse graining accessory to remove rough spots. Vacuum. Do not leave dust behind. Now shape the plan with the first coat of paint. Apply with a roller or a wide brush, allow to dry. The fine sandpaper installed in the nozzle mill abrades the surface, removes the dust and makes the second layer of paint. Lacquer of restored parquet It is important to apply a varnish to the fibers on the parquet. The last layer of dry polish for at least three days. Inside, close all doors and windows, avoid drafts and do not allow dust to fall onto the freshly painted surface.

3. Scratches and cracks.

Parts that are scratched or cracked

If there is a pet in the house, scratches will appear on the surface of your pet's claws. With a little scratching, they can be removed with a wax stick that clogs the micro cracks. This is a cost-effective recovery option that requires little time and effort. For example, when there are deep scratches or deep cracks on the floor, they move furniture without upholstery on the feet. You can not do this without cleaning the paint. Clean it as described above and remove a thin layer of wood with a manual or automatic cycle.

It is difficult for an inexperienced beginner to achieve an excellent result. Be prepared to repeat the tweeted procedure several times. Then carefully remove the dust residues in the room, the floor and the putty and cover them with a coat of varnish. Repeat the process several times until it is completely smooth.

4. Gaps and chips in the ground.

On parquet floors this problem often occurs

Although the parquet floor is made of hardwood, it is not immune to significant damage. In this case, the actions are the same to eliminate scratches. They dust with dust after cycling. Paint the defects with a broad spatula. Try to maintain the movement in the direction of the wood fibers. Since the filling mixture consists of wood dust, chips and treated potholes do not occur in the general context.

5. Slot.

This condition of parquet must be cut to follow the condition of the floor

The spaces between the matrices appear due to the ability of the wood to absorb and tear water when the room air is dry. The solution to this problem is simple. It is also necessary to remove the protective layer. Suck up each crack carefully and clean the trash with a knife. The open and clean grooves cover a filling solution with wood dust. Then it also restores the lacquer layer in several layers.

6. Soil crisis, local restoration of the parquet.

Dirt must be cleaned before installing parquet

An unpleasant sound floor is released for three reasons. First, the bars that were released from time to time, second, the wedges that were pressed between wall and floor, and thirdly, they seemed to be empty under the boards. By removing it is not necessary to remove the paint and scratch the plane.

The floors are laid out on a plywood sheet or ruler. Over time, they collapse and errors occur. At this point, the ground begins to crack. You can easily fix the defect. It defines a plate from which the crunch is distributed. Drill a hole and pump the cement or glue with a large syringe. When working with cement mortar you should consider fast curing, so do everything carefully and quickly. When the mixture stops pumping and appears on the surface, complete the procedure and press the zone. Remove the weighting agent and spatula from the drilling site after two days. What if the crisis is very well located? Then you have to repeat the entire surface. Not only does this remove the protective layer, it also completely rewrites the floor.

7. Swelling.

Damage like this parquet must be replaced

The biggest discomfort can be considered when the panels are illuminated. This suggests that the rods were bloated when the placement technology was breached or water sank beneath the tree. If you hit the bottom of the shield, you can not do without a complete restriction.

When small areas are swollen by moisture, we heat the floor surface. After a certain characteristic smell of chemicals has occurred, the treated area is stressed. Its weight should be 12 kg per square meter or less. After 24 hours, we check whether the roughness has decreased, and carry out the process again. If the equipment was damaged when laying the floor, the space between the floor and the wall was not considered. Dry each stone under natural conditions and then bend the ground.

8. Restoration of slats.

Carefully repaired parquet frames

 When restoring parquet floors, it is often noticeable that some bars are no longer held in position. In this case, old tapes need to be replaced, and additional restoration work is required throughout the plan. The procedure will be like this

The procedure will be as follows:

• We eliminate the paint to be found and need to be repaired.
• If the distance between the two bars is more than half a centimeter, it must be replaced
• Small slits, pour the glue on it, hang up the weight and let it act for several hours.
• If the rods are replaced with a hammer and chisel, gently remove them by dividing them in the middle.
• The remaining wood glue is cleaned with a small spatula. Adjust the size of the replacement bar.
• Lubricate the clean surface with glue. Position the bar so that its grooves align with the tilting slots and press firmly.
• After 7 days under the weighting means, the entire floor is covered with putty, polished and treated with varnish as in the other examples.

9. Glued clay and chewing gum.

Many equipment available on the market for parquet

 At the end I would like to tell you how to get rid of the vital activities of young children. You can often see a nuisance like chewing gum in a fresh tree. The solvent helps, but the stains remain. Use an ordinary ice cube. If you hold it on modeling clay and freeze, you can easily remove the "decoration" from the parquet surface without damaging it.

10. Reasonable care.

The flawless parquet floor is very pleasant

So that the floor is always in perfect condition and does not need to be restored, just follow the simple operating rules. Three phenomena can damage a wooden floor: ultraviolet, a considerable moisture or absence, sand. Moisture plays an important role in the sustainability of the board. If the room is too wet or the floor is often washed, the table will swell with time. In addition, under the base can develop a mold that is already hazardous to health. Dry air dries dishes and releases them. Under the action of the ultraviolet tree, it changes color, becoming dark and ugly. The sand ruthlessly scrapes a smooth floor.



Therefore, it is recommended that the room is in slippers and does not walk on street shoes. It is advisable to put on a small carpet before entering the room, where you must clean the sole at each entrance. Window blinds prevent the floor from becoming darker. And wash the floor with a damp cloth only, at most once a week.

Conclusion

The restoration of the old wooden floor is relevant. Changing the entire floor requires a lot of time and money. Even a novice beginner can restore the ground with his own hands while having the necessary tools, patience and the most important desire.