woodflooringz

Broken parquet is quite easy to replace

To replace a damaged parquet floor you do not need to replace entirely. Parquet floor using parquet were easily damaged, especially coming from the wood.

Parquet flooring is usually damaged due to water, friction sharp objects, errors in mounting or rising temperatures plaster.
To fix it you have to know the system installation such as interlocking nails or glue.
Usually a lot of parquet flooring using glue and nails by providing adhesive tie it with a nail. Such systems are widely used in solid wood parquet often experience shrinkage expansion.



If there is a defective part you drill the damaged parquet flooring then lever and make sure it does not damage the surrounding parquet. Remove any adhesive that existed around the damaged parquet.
After the damaged parquet regardless you install a new one. Make sure the color match the floor and parquet. If the first installation of parquet before you have saved, it is good because it will fit in the installation. If none of you have a sample to the store to replace the corresponding material.

Parquet replace make sure you have at least one day in space. Make sure the newly installed parquet it expands or shrinks significantly causing problems after installation.
Generally the risk is very small because you are dealing with many types of parquet flooring that shrinks or expands.. Make sure all the adhesive has been used already lost. Then use the glue on the base floor. Wait for the glue to harden and sticky. Insert a new parquet with his tongue in her mouth first lock on the parquet next. Sometimes it hangs parquet, parquet at carefully with a hammer so that the parquet is completely inserted and locked in a series of parquet flooring.
You must also provide finishing with a new parquet. The goal for the new parquet color matching with the old. You can use wood varnish or oil.

As you know parquet floors offer very good thermal properties in places or countries where temperatures are very low all year round. Wooden floors are not as cold as masonry or ceramic tiles. If a house has hardwood floors, it is good to remember that the water should not be poured, as this will cause the wooden floor to expand and curl and should be removed. This type of floor should only be cleaned with a mop or wet rug, but it should never be soaked.

The procedure for repairing or repairing damaged floors is to remove damaged parts with a scraper or a carpenter's knife. Once the area is open, clean the adhesive residue and if the area below it is wet, allow it to dry for one day. Choose spare parts, measure correctly and adjust. Make sure these woods are thoroughly sanded before applying the glue and correct them again. The grinding of the patch after the correction damages the good part.

The floors must be fixed on a dry masonry floor. When ready to replace it, apply glue to evenly connect wood and masonry with Spreader Spreader. Make sure the glue is good. Choose the replacement and hit it evenly with a hammer to make sure no hammer marks appear on the wood. When done, take a very soft sandpaper and remove excess glue. Once you're done, choose a sandbag and pull it around the wood to smooth it out.

Check the type of polyurethane finish used, whether glossy or matt, to suit the existing one. Apply the varnish in three different layers. The first and second can be done the same day, but after about six hours time difference. The last coat can be applied the next day. Lay the cardboard around so that it does not touch the wet polish. After applying the final coat and wax, apply the entire floor dry to obtain a uniform paint color.

Bamboo needs to be strengthened before use

To care for bamboo treatment for strength and termite resistant must know in advance the various types of bamboo are used. Bamboo species are very diverse and there are about 1250 species of bamboo in the world. Bamboo is not so much used as an ingredient of innovation. Bamboo material strong enough for building structures, good and cheap.

Bamboo is used should the ripe age of four or five years. This can be seen in terms of physical as leaf color, petal. If the bamboo would hit a loud voice that indicates the bamboo is old and dry.
If you do not immediately use it to cut down bamboo. Better to let a few days in an upright position so that all the liquid in the bamboo down naturally. Use the pedestal to the bamboo made of stone so that the liquid does not go back into the bamboo.



Bamboo that have been cleaned of all dirt attached to bamboo. Bamboo is ripe it will not cause shrivel if bamboo is dry,
The density of bamboo rods can be measured by density or density test.
One favorite material termites in bamboo is glucose. To remove them, you can extract glucose with saline unwelcome termites. In earlier times people immerse into the mud or river and the process is quite long about three to six months.
At this time many people use Borax-boric acid by the method of soaking pool and use the vertical soak diffusion (VSD) were injected into each bamboo rod

Bamboo then dried after the preservation process. Bamboo should arranged with vertical position and protected from the sun. Use natural air flow. This process will takes about two weeks.
After this process the bamboo ready for construction materials or furniture.
If you have the furniture that should not take place directly exposed to sun and rain. Bamboo is also very sensitive to temperature so easy to crack and spread throughout the bamboo material for a straight fiber.

Bamboo is used it is not directly related to land due to the entry of moisture into the bamboo fibers causing fungus on bamboo. This will reduces the strength of bamboo.
Each bamboo used to be coated protection or water base fluids. Bamboo is exposed to water must be drained so as not to soak into the bamboo rod.

If you are someone who wants to decorate your house in an ecological way, the bamboo floor is the product you need. Bamboo is more a plant than a tree, but it is stronger than many forests. With its rapid growth, bamboo will regenerate in just three to seven years, while many trees will take 30 to 50 years to reach the required size for wooden floors. The bamboo roots remain intact to regenerate more bamboo shoots, while the cut trees do not grow back from the roots. These tree roots are part of the heavy waste that is burned or dragged. Although many other parts of the trees are rescued and minced to produce wood products, bamboo is getting softer and softer for our planet.

Bamboo floors are made from bamboo plants grown in plantations and collected every 3 to 7 years in the wild. Bamboo is a commercial culture in more and more countries. There are even studies on the cultivation of bamboo in the house. Although bamboo can be invasive and spread where we do not want it in our classes, there are non-invasive bamboo species. Pruning and cutting the bamboo encourages the plant to continue growing. The hardness and resistance of this soil depends on the age of the harvest, the thickness and the treatments applied to the bamboo. Bamboo can be made into rods, plywood, boards and high quality furniture floors.

Bamboo is harvested by cutting the bamboo stalks, then cutting the rectangular strips, which are cooked to remove the sugars, and then dried and treated with a low moisture content of 6 to 8%. These bands can be vertical or horizontal and can be carbonized to darken them. Then the strips are juxtaposed or layered and pressed with adhesives into solid wood boards or plywood boards or engineering floors. These plates or plates may be unworked or tinted and finished to facilitate installation.

Bamboo floors are in the form of solid wood floors, technical floors (panels) or laminate floors. The designed and laminate floors can float floors opposite the installation of the homeowner. They are affordable and can be found at wholesalers or retailers in places like Home Depot Stores or Flooring and Supply Storage for the home, and in Lumber Liquidators. Companies such as Wilsonart and Synergy Teragren Floating Bamboo are constructing natural or laminate flooring, while Cali Bamboo is not a refined manufacturer of solid designed bamboo parquet, or prefabricated or bamboo.

Wood floors also allow it to be used for bathrooms but with conditions...

Is it possible to use wood materials for the bathroom or a swimming pool? Maybe you do not believe but in fact can. But not just any wood used timber. Wood material used is made from a mixture of wood powder, PVC and various other organic substances as glue. The appearance of the wood is also no different from solid wood and has a natural impression.

Why the material is resistant to water? This is because the PVC content in it. The material is suitable for use on walls that are wet or flooded like the bathrooms and a swimming pool.


The advantage of these materials are strong, resistant to termites and does not propagate a fire. Materials that will not rot even if exposed to heat and rain so suitable for use in indoor or outdoor.
If you are using for the outdoors should use anti-ultraviolet coatings for paint and painted periodically every two years. Sunlight can fade the color of the wood surface.

The materials used include wood composite proficiency level that is environmentally friendly. Materials can replace the use of wood in solid and durable and non-toxic even though it contains PVC. Since the material is not burned then the poison will not come out. Making the material is also not through combustion. The use is also more efficient for application on walls or floors.

Disadvantages of this material if comparison to the natural wood is not as strong as natural wood so it is not possible to use a substitute for wooden structures.
Wood composites are much cheaper than natural wood such as teak. We just cannot compare in terms of price but the various advantages of such materials and proper use.

If you need to choose between a carpet or hardwood for the floor of your bathroom, wood is the best choice. The moisture that normally prevails in a bathroom can cause many problems with the carpet. If you decide to install hardwood, you have to do it by a specialist. Moisture can cause chaos on the wood and eventually destroy your soil. A professional will install it properly and make sure it is properly treated and sealed.

The best solution I can offer you is to choose a laminate floor. Laminate floors look like wood or other flooring you want, but they will carry a much stronger layer. Because the seams are glued together, you have no problem getting moisture into the ground or through cracks. You will also find the best deals on a laminate floor available.

Some people prefer not to choose laminate and opt for wood. Engineered wood resists water much better than hardwood, but it looks the same. If budget allows, we recommend wood on laminate floors. The main reason I recommend laminate is that it is economical for most homeowners.

Is your heart absolutely on a wooden floor in your bathroom? If there is scope, another highly recommended solution is to take the path of the stones. A marble, granite or limestone bathroom floor adds a touch of class. The most common complaint is that the floor is often barefoot cold and can slip. In addition, these floor coverings tend to be more expensive than parquet floors.

After all, if you are a budget conscious consumer, you can choose vinyl. Vinyl flooring is easy to install, economical and waterproof. Of course you do not have the same finishing touch and look at your bathroom. But if you need to replace the ground immediately and do not have a big budget, this is the way to go.

A neat window is very comfortable, but needs maintenance

Window treatment ideas for wooden blinds for homes typically have openings such as Windows. This is often problematic for example with hinges and also layout.
The function of these wood blinds serve to filter and also the additional ornament.
Many of the advantages of wood blinds look simpler easy to clean and the price is cheap. Materials with wood blinds are suitable for use for all types of room and gives modern look in the room.

The working system of wooden blinds are usually there is a rope that serves to raise and lower the blinds. In addition, there is a filter that is actuated by a lever or cord wood. This Filter works to change the angles of the sunshade.



A problem that often arises is out from a filter that is worn out or broken. The downside of wooden blinds are located on the filter and the rod is easily broken. Its main cause is an error in the operation of especially time opening and closing as well as set up the corners. On the corners of the rod is very important to set the intensity of the light coming into the room.
To do the rod is can pull the ropes of the player and not changing the angles of the corners of the sunshade can be ensured already filter is not functioning properly.

To fix it you have to let go of all the blinds so that left just iron holder. You can release the lock of the iron rubber found on the iron blinds player. Then stretch the iron rails of sunshade player so that the filter is not damaged and is issued.

Please enter a new filter and sits right in the filter after that reinstall filter and rubber steel locker. You should pay attention when installing iron filters. Corner of the sunshade when it should be in a condition of full open.
Stages for the installation has been completed. You can do the test by turning the lever and observe the movement of the blinds. Pay attention to the corners of the sunshade and must function properly.
The best ideas for window treatments are those that allow the buyer to choose the best materials and styles that are possible to achieve the perfect look of the window.

Of the many common window treatment ideas, you can choose the one you want based on the type of window you want to edit. If the window is placed in a room where a lot of light is needed, light curtains are appropriate. The curtain material that would be most desirable in such a case would be cotton, linen, polyester and mesh. These curtain fabrics allow light without compromising privacy. These types of curtains use bright colors like white and cream. Window treatment ideas like these are best suited for rooms and kitchens where interior spaces should be bright.

In addition to the bright curtains, you can also place blinds and shades of bright colors. The blinds can be placed vertically, horizontally or rolling. The material of the blinds also varies depending on usage. For a contemporary look and low-budget solutions, the PVC awning is one of the best ideas for the treatment of shutters. They are heavy, strong and easy to care for. These come in many colors and their slats can be placed horizontally or vertically according to your preferences. Wooden blinds have a nice look. These are best suited for rooms and houses with wood decor. The wooden blinds are ideal for rooms that are too bright, in which the interior of rooms has to be darkened. Roman shades are also very popular. This category of window coverings is easy to handle and can also be done at home with new or old curtain fabrics.

Curtains with thick fabrics and dark colors are other ideas for treating windows in rooms that are too bright. These curtains, combined with the edges, complete the entire treatment of the windows. Heavy shutters can also dramatically improve the appearance of windows. The different types of shutters that are suitable for this purpose are relief plates or colonial style. Shutters are available in a variety of print designs, semi-bright filters and blackout types. They also give the windows a new look. Shutters can be placed inside and outside the home and can be decorative due to the use of different colors or materials, such as bamboo. Awnings are a frequent choice for bright rooms. The good thing about awnings is that window treatment ideas using awnings allow the breeze to penetrate in while keeping the sun outside.

Each room needs different window coverings. Windows in the living room or living room should be decorative and stimulating. In addition to curtains and decorative borders, your windows can be completely renovated by adding a huge ornate glass or glass shelf to the window. This would replace the simple and monotonous appearance of the exquisite.
Ideas and styles of window treatments, such as awnings, windows, frames, slides, grid plates and stained glass, can be used to renovate your windows.

Window treatments can also be performed outside of windows. Can windows commonly used in kitchens have a projecting shelf that can be used to hold potted plants for decorative purposes. If you are a plant lover, climbers are a great way to decorate your windows from the outside. This is suitable for small windows that are less frequently used. Windowing ideas based on country issues can be quite exciting. You can choose a theme, such as Arabic, French or Italian, and set the architecture of the window according to the theme you choose. These architectures are very different and have a range of window treatment ideas that you can apply to your windows.

Before renovating a house, choose the best material

 Various factors need to be considered in order for the renovation of the home is not hurtful later in the day. If renovated properly so it can bring in profit on the house you can take, if it is wrong then you will lose out

First you need to pay attention to is be patient. If you buy a house from a previous resident of the house was changed to your liking. We recommend you try the first time according to the existing form. There is a possibility after trying to change this desire would be reduced or even lost because feel like with the condition. You can think of a more suitable design if urgent circumstances and could save you money.

There is an impression to renovate the house is difficult and can only be done by a professional. You can plan for yourself by viewing the home renovation in books or magazines and  internet. Maybe some work could be done by myself and others asked for help professional services. This will saves you a lot of money.

Make sure that you can do it. This you must know the limitations. The intent you want to save can be spent a lot of money if you make a mistake. You do not do home renovations if it must be done by professional especially when using tools that are hard to search for.

The value of your home is largely determined by its surroundings. If you do get the better of renovation of the neighbor's House. For example, you are designing your kitchen with modern kitchen and your neighbors using the old style. This will adds value to your home.

For the renovation of the House, of course, you use the budget you already provide. Financial planning will not be far exceeded after the home is completed in renovation

Parquet floors need intensive care

The best way to clean the parquet flooring needs special attention. Parquet wood flooring has become very popular because it is suitable to use modern interior design.
The same is also caring for the wood-based furniture. Parquet floor care also requires the same rigor.

The things that are common to clean the wood or parquet flooring is a sweeping advance. When you do too much washing use water because it will damage the parquet and can lead to rot. The main enemy of the parquet is moisture then use a vacuum cleaner or dry cloth to remove all traces of dust. Humidity in the parquet can cause pressure differences as a result of the joints on the parquet floor to escape. Puddles on the parquet will cause water trapped in layers of plywood and make a rotten wood.



There is a special detergent to clean the parquet. If you use a vacuum cleaner that also use an additional coating layer should not be scratched or chipped. You can also varnish parquet floor so the floor will be shiny. The cloth used to clean gently cleaned specifically for special cleaning parquet.

If parquet flooring food or beverage stains, you should clean it with a dry cloth. You can use a special fluid for parquet when the dirt is difficult to be appointed. Be careful when you move stuff because it can lead to scratched floors. We recommend that all furniture legs coated with rubber so as not to cause scratches on the floor. Try to move goods by pushing it on the floor because of the way it will potentially damage the floor.

You can perform periodic maintenance on the parquet floor with wax or varnish re-process each month with special polishing parquet and every two years to re-do the coating. To clean dirt that is very difficult as the paint on the floor you can use a cutter to scrape debris that stick up all the dirt up. You have to do it carefully so as not to damage the surface of the wood. Keep the timber melamine layer is scraped off,  then you can rub it back up to look uneven. Parquet floor does require more intensive care than ordinary floor.

In terms of transformation, today's families are looking for smarter and cheaper ways to beautify their habitats. As far as the flooring is concerned, the possibilities are endless and can be one of the most expensive and daunting decisions in terms of renovation. Although there are many options, such as carpets, tiles, even concrete, parquet is another option that is sometimes overlooked. It's a durable product that is easy to install and can last for decades. It is a meaningful and aesthetic improvement for every room in the house, from the kitchen to the basement. Parquet can be laid on concrete as well as on hardwood, laminate or ceramic tiles, making it a simple DIY project.

The parquet dates back to 1684, when he replaced marble in Versailles, France. The previously used marble floor needed to be constantly cleaned and water flowed into the underlying floor supports and allowed it to rot. Parquet, known for its beauty and strength, was also easier to clean and its use spread quickly. Nowadays parquet floors are made of solid parquet and parquet boards using different types of wood such as oak, pine, mahogany and walnut. The solid parquet consists of wooden blocks glued in different patterns. The best known is the basic pattern. It's typically 3/4 "to 5/8" thick and tack-tolerant, as opposed to nailing, as is traditionally done with hardwood floors. Parquet boards are hardwood veneers that are glued to less expensive wood such as plywood. The film (also called wear layer) can have a thickness between 1/4 "and 1/16". It is assembled with glue using tongue and groove joints.

The cost of parquet is only one of its attractive assets. There is one floor for all budgets and all needs. Depending on the type of floor, whether solid or veneered, the wood chosen and the thickness of the wood, it varies from $ 0.99 per square foot to over $ 60.00 per square foot. Hardwood floors are more expensive, but can be sanded and restored throughout the life of the floor, while sanding or finishing the floorboards can make the finish to the cheaper wood underneath. Great care should be taken not to spoil the ground.

Medallions are also available, and although they are usually quite expensive, they are beautiful works of art and the design knows no bounds. The cost is usually between $ 1,300 and $ 3,500, depending on the size and type of wood used. The medallions use some of the most exotic woods, which greatly increases their costs. The care of the floors is simple and generally requires only a wet mop to give them the best possible look.
Guarantees for the floors vary. Some hardwood floors are covered for life, while less expensive boards can reach 25 years, depending on the thickness of the veneers.

Just for fun, one of the most famous floors began its journey in 1946 as the floor of the original Boston Arena, home of the Celtics. In 1952, he was completely transferred to the Boston Garden, where the Celtics used him until 1995, when he returned to today's Fleet Center, now TD Garden. The floor was used until 1999, when it was cut and partly sold as a souvenir, since the Boston Garden was demolished in 1998. Today, the Celtics play on a floor very special parquet floors. Origin and the new.  If you choose a new floor, parquet can be just what you need to make it so beautiful.

Old wood looks elegant if care is correct

To achieve the look on the old wood and also rustic crafts person generally creates texture by using a special tool in the past to create what you want.
Wood is chosen should be as required. Wood from forests that are clean, straight and has a slight grain. Materials such as these to types of wood such as cherry, birch and maple. Rural atmosphere can be created with the right settings. The material is placed with the correct setting with a rural background.

The next step is to fake aging. Wood can be made with wavy grain and wormholes. Maintained smooth wood surface. Texture maintained and will not overwrite the beauty of wood.
Tools such as a wire brush suppresses the natural grains in the wood. Scraping tool can also be used.
Rural atmosphere will make wood floors will bring great beauty to the home. The decor is appropriate should be adjusted to the condition of the timber to look really fit. By creating the impression of wood like an old house likes the centuries-old.



This type of decor will provides warmth and comfortable to the senses. Designs suitable for every room in the house. You can be creative as well on home furnishings like sofa chairs, tables and beds.
Helped bring the furniture into the rural atmosphere with the decor in the room. Likewise, wooden lamps, wheel barrows, deer antlers would depict wildlife in the past. You can also add fresh flower arrangements, watering cans will add a quaint atmosphere that really fascinating.

Rustic creations you can start from the kitchen. You can use the kitchen in rural areas by allowing the wood fibers and add on top painting. This rustic atmosphere you expand outwards, like the patio and yard. You can use an old sink as flower planters, benches rough cut and fashioned swing on the porch and so forth. The cottage in the yard will adds to the rural atmosphere of your home.  You do not need to do it in a day but gradually.

Deciding what type of soil to use in your new home or renovation project can be a difficult decision. Some homeowners decide to use new parquet floors, some use laminate flooring and others simply opt to leave the carpet. These are all very good types of flooring, but have you ever laid an old wooden floor?

Why would anyone want to use old wood, probably from a 19th century farm? Nowadays old wooden floors are becoming increasingly popular and new homeowners are looking for something different for their home. Something that distinguishes their houses from the neighborhood and adds a classic charm like the houses of yesteryear.

One thing is for sure. An old wooden floor is unique in its class. You can no longer access the local hardware store or hardware store and buy large planks as they were cut years ago. Today, wooden planks look different. Old wood has a distinctive look because the grain of the wood is denser. The narrowest grain is the result of slow growing trees. Nowadays wood is cut by fast-growing trees and the grain is not so narrow, which is often not as strong and has the same warm appearance as older wood.

Where can you get old wooden floors? Some companies deal with old wood for the production of soils, among other things. These companies retrieve the wood from the old abandoned structures and make it available to the new houses. Old wood is also saved from the rivers, where it sank years ago when logging.

Before installing the wooden floor must be in accordance with the color of the room

Matching of appropriate wood to use for the floor becomes important when you intend to install hardwood floors. Using wood as flooring require details to be adjusted to the room. Wood fibers are also found in many common wood without modification process.

Wooden floors are not just appear with the simplicity of only grain but has varied in line with the development of the interior world. Developed variations as there are wooden floors with a random pattern when installed and there by using a variation of the thickness and depth when installed.



Wooden floors will give an unique feel to your home as well as environmentally friendly materials. Controversial side is one factor that destroys the forest. If you buy wood buy through a company that uses the certificate.
Trends in wood floors can also switch to the scheme. One type of oak that cannot give all the options you want. Oak can also be integrated with a variety of styles and colors.
Once beech wood, walnut, maple, iroko, cherry, teak and so gives the appearance of each fiber and different colors.

Wooden floors with modern design serves to soften the harsh impression on modern buildings commonly used ceramic, glass, metal and so on. Wooden floors also provide warmth throughout the room. Installation on a wooden floor can also provide the appropriate colors to be combined. You can choose the wood flooring of the same color and size and then mounted the desired place.

Wooden floors are very popular in many houses. In fact, if some people are looking for a new place, that's part of their checklist. This aspect is so important to some who refuse to buy a house that does not. Although this is an interesting feature, some people have this type of soil and do not like it too much. It's not that you do not like her appearance. They just do not know how to match their furniture. Therefore, instead of being something that enhances the look of your home, it becomes a burden and a burden. The good news is that there are different ways to combine different decorating styles, decor and wall colors to suit this type of floor.

A color that tends to harmonize well with brown is red. Someone could install a series of red sofas or a red decorative wall. You could even add red table decorations or red-domed paintings. You do not have to go too far. The fact that red is one of the main colors of this piece will help to create a perfect combination between the floor and the decoration.

White is another good color for those with parquet floors. It does not necessarily mix with the ground. However, this allows the jumping of the wood. In fact, the white would really work as a good background color and not necessarily as an accent or fusion color. Of course, most people, especially those with children, are unlikely to want to buy a white sofa. However, you can make other choices, such as including pillows and white decorative flowers. This will breathe life into hardwood floors. Another good idea is to make all the white walls.

Another option that would really help to connect and connect the hardwood floor to the rest of the house is to incorporate dark colors such as brown, green and brown. These are the colors that we normally see in nature. It's great because wood is a natural substance of trees. So, if someone went outside, I would see these colors melt effortlessly. Therefore, bringing the same colors to a house with this type of soil would produce the same effortless fusion effect. So instead of having the ground to jump or combine a certain color, it would eventually mix and create a flow.

Wood must be dried before use

For wood drying method used a variety of ways. You have to understand the situation on the wood. Despite the relatively small volume of water but also the surface is small and requires a longer evaporation. In addition, you need a longer time during the process of stacking and unloading the drying chamber. The drying process can be done with both traditional and artificial drying

Drying is traditionally done by the sun. For the log to meet the requirements of the drying process to prevent rapid deterioration is to make it so it does not have to be high when there is rain flooded. Sources pest should also be eliminated. The ground floor of the log to be loaded quickly angled to the water flow at the base of the floor.



Stacking can be done vertically and is suitable for wood that is not easy to crack. Stacking horizontal or parallel to produce the amount of wood more. The disadvantage is the drying will be slower because of the surface covered by other wood.
Stacking also do cross so that the touch area to be small and slanted wooden layout and there will be no water deposits on wood so the wood dry faster. Another Stacking is a triangle. Wider area required, drying will be faster than the contact area of ​​the wood.

Drying in the sun has a weakness that is drying speed, capacity and length of drying and highly dependent on the presence of the sun's heat. For faster drying can be done in a conventional manner. How this is done by using steam that is pushed into the room and then circulated by the ventilation fan in it. Steam heat will dry the wood and moist air out through vents in them. Drying this way is quite good because it is done in stages and stable. The downside of this system is in need of considerable power because of the flow of steam into the room should not be stopped.

The system is faster than the conventional way is to use a vacuum kiln. Drying takes place very quickly and this way is superior to other systems and the quality of dried wood. Another advantage is that this system does not cause air pollution as in conventional systems. The downside of this system is the size of the timber should not be limited because of capacity vacuum kiln. So capacity compared to conventional kiln quite small. Operational costs are also larger than the conventional way and also greater investment.

Another way is to recycle the dehumidification kiln to heat the room air and circled back to the sidelines of the wood pile and then get out of the vents. Dehumidification kiln flowed back through the cooling coil so that the water vapor decomposes back.
Water is decomposed and removed through a special exhaust hot air back into the room air. If the air is too hot there is a special fan to circulate the hot air out. The cost involved is also slightly larger than the conventional way.
Operators who have the expertise in the drying process is also very important. With kiln drying can also cause damage or shrinkage in the wood if not careful in execution.

Traditionally, softwoods are inexpensive and easy-to-use woods that are used in the construction of houses for floors, beams, beams, windows and doors. They are usually painted. Hardwoods, on the other hand, are usually more expensive and are considered to be more durable and difficult to work. They are used to make furniture and sometimes they are dyed, then polished or varnished to highlight their natural decorative properties of texture and texture.

In recent years, many traditional British and European hardwoods such as ash, elm and lime have been replaced by varieties from Africa, the Far East and North America. South. The most commonly available hardwoods are so-called "red" hardwoods (mostly mahogany) and yellow ramin, but a wide range is available from lumberjacks.

Due to the high cost of hardwood, it has largely been replaced by home improvement work done with synthetic planks covered with a thin hardwood veneer (eg teak or mahogany) that is widely used in the manufacture of furniture shelves.

There is a good selection of plastic panels that can replace the use of smooth wooden boards: There is also a wide selection of hardwood and soft wood strips that can be used at home. The most common sizes of softwood and some types of hardwood are available in large self-service stores as well as in some hardware stores; Go to a timber dealer for the entire area.

Transformation and seasoning
A tree that has just been felled contains a lot of moisture. To turn it into usable wood, it has to be cut and dried. These processes are called transformation and seasoning. Some soft woods can be treated with preservatives.

Saw
The wood is usually sawn: or end-to-end (sometimes referred to as a single cut or cut per cut). This method cuts the record into tables by simply cutting it into the tree. Most growth rings make an angle of less than 45 degrees to the surface. The moisture content of a tree is greater outdoors than in its center. When the sawn wood is completely dried, all the boards, except those cut directly in the middle of the tree, tend to deform. , Planks should be planned flat after drying.

or quarter sawed. The wood has growth rings that make an angle of 45 degrees or more with respect to the surface of the plate. It is often more expensive than sawdust as a whole, but it is much less likely to be deformed.

Dry
Dry wood when stacked or dried in the fresh air. Drying makes wood stronger, more resistant to mold and better for painting and varnishing. Once the wood has dried, it can still absorb and lose moisture; It contracts when it loses moisture and expands when moisture gets wet. Outdoors stored wood is reduced in closed rooms, especially in rooms with central heating. The effect on wood depends on how the wood was cut: the sawn wood in its extension tends to warp, while the sawn wood in a room tends to be evenly reduced. When wood moves between environments with very different moisture levels, it is important to balance the wood with its new environment. For smaller sizes, it can take a few days, for larger ones, more than a week.

Furniture of high quality wood is always in demand

Inside the house is common items that are unique and interesting as a bed and furniture.
The materials used are generally made of wood and metal. For a bed made of wood various designs and dimensions have been created to satisfy the tastes of the homeowner. While the material is made of metal you can play a variety of shapes and carvings and motifs.

Designs for beds are constantly changing and usually follow the interior design as well as the wishes of the owner. Besides the furniture style and layout will also reflect the bedroom owner. Furniture used in the bedroom will also be selected according to individual needs. The things that are unique to the bedroom furniture is also available with traditional and contemporary styles as well as high quality. The bedroom will be decorated with furniture that is unique and has an elegant look and it will also provide a comfortable atmosphere.



Design a bedroom with furniture available for children and adults alike. The bed is also available from a variety of sizes as well as wardrobe, dressing table which is also produced in a variety of styles and shapes. Generally, the material used for the unique bedroom furniture is solid wood such as pine and teak.

Materials used must have the good durability. Besides the price is also affordable and convenient to use, especially for the bed. Bedroom furniture is what you get with a traditional bed and modern.
Size of space becomes very important to choose furniture that will be used primarily by the dimensions. Make sure your bedroom is not overcrowded and you will not waste my money with furniture that you will buy.

Some types of furniture that is often used on a bed as Oak bedroom furniture that is unique and exudes elegance. This material can be made from classic to modern are available for a large bedroom. Style oak furniture is usually used for bedside table, wardrobe and dressing table.
Besides a lot of oak furniture is also used for children's bed are unique. Oak wood is also very solid and durable.

You will find bedroom furniture that is unique and interesting. The uniqueness of the space and the design will reflects who you are. Something you find an unpretentious culture of rural tub modern and traditional.

We guarantee that you will find the perfect style, look and style that will reflect your personality as you purchase unique bedroom furniture. Like the rest of your home, your bedroom must be the perfect environment and atmosphere that suits you in every way. Would not it be great to find the perfect collection that suits you? More than enough storage space is a decisive advantage.

The unique bedroom furniture is beautiful and made of high quality materials. You can also get custom parts that match the image of your piece. Do you have a certain cultural style in mind, maybe French or Italian? Both are European but have specific details that distinguish them and make them special. Maybe you want something more rustic: solid, earthy wood? Whatever you are looking for, you will find it here and you can create the environment that suits you ...

"Durability" is one of the main features of a unique bedroom furniture: all elements are made with the best materials because they are designed for a long life. You will find pieces of solid teak, wood, pine, but also some metals, which are therefore of good quality.

However, good quality does not necessarily mean cost: Unique bedroom furniture is affordable for everyone. The internet has great deals on most things. When you buy, you can look and buy things without leaving the comfort of your home. On the other hand, when you go to a store, you can look into the rooms, touch them and feel what you want.
"It's your choice ..."

The bed is the heart of every room: comfort, relaxation and warmth. Unique bedroom furniture offers traditional or modern beds, platform beds, main beds, metal beds, four poster beds, futons, king or queen beds. They come in different shapes and sizes. Other pieces are also available, such as drawers, bedside cabinets, cabinets, dressers, bedside tables and cabinets.

"Imagine having a personal refuge that reflects who you really are ..."

Planning is essential for the purchase of unique bedroom furniture. Most houses do not have much space, so it's best to know the size of the set and measure the size of your room first. You would not have lost any money.

Did you see any wooden furniture? What do you think? This is more in a rustic theme, but can bring something more in any room, especially if it is the only piece of wood and the rest is not, can be a great contrast to the same time it gives the room an atmosphere that already unique atmosphere contributes.

If you are looking for unique bedroom furniture, you will find a wide range of interesting pieces that are sold at affordable prices, have an exceptional level of quality, look good and give your room a wonderful family atmosphere.